Master-force 241-0428 Betreibershandbuch PDF herunterladen (Seite 13)

Page 12

SAW BLADES

All saw blades need to be kept clean, sharp

and properly set in order to cut efciently.

Using a dull blade places a heavy load

on the saw and increases the danger of

kickback. Keep extra blades on hand, so

sharp blades are always available. Gum and

wood pitch hardened on the blade slows the

saw down. Use gum and pitch remover, hot

water or kerosene to remove them. Do not

use gasoline.

KICKBACK (FIG. 3 - FIG. 6)

OPERATION

WARNING:

When using the saw,

always stay alert and exercise control. Do

not remove the saw from the workpiece

while the blade is moving.

WARNING:

A 6 1/2-inch blade is

the maximum blade capacity of your saw.

A blade larger than 6 1/2-inch will come

in contact with the blade guards. Also,

NEVER use a blade that is so thick that

it prevents the outer blade washer from

engaging with the at side of the spindle.

Blades that are too large or too thick can

result in an accident causing serious injury.

Blade is Set Too Deep

KICKBACK

DIRECTION OF CUT

Correct Blade Depth

FIG. 3

WRONG!

WRONG!

INCORRECT SUPPORT

FIG. 4

Correct blade depth setting

is 1/4-in. maximum or less on

underside of workpiece

1/4-in.

maximum

FIG. 5

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare