Master-force 15A Betreibershandbuch PDF herunterladen (Seite 11)

Page 10

POWER SUPPLY

The power tool supply must match the

nameplate rating.

INSTALLING THE SIDE HANDLE

(FIG. 2)

1. Unplug the angle grinder.

2. The side handle may be installed on the

right side or the left side of the tool.

Thread the side handle into the desired

operating position.

3. Securely tighten the side handle by

turning it clockwise.

ATTACHING AND ADJUSTING

THE GUARD (FIG. 3)

ATTACHING THE GUARD

1. Unplug the angle grinder.

2. Make sure that the prominence on the

guard coincides with the groove in the

gear case cover.

3. Rotate the guard counter-clockwise to

the desired position

4. Pivot the guard-lock lever to secure the

guard in place.

ADJUSTING THE GUARD

1. Unplug the angle grinder.

2. Pivot the guard-lock lever to loosen

the guard from the gear case cover.

3. Rotate the guard counter clockwise to

the correct position.

4. Pivot the guard-lock lever to tighten

the guard securely.

WARNING:

Never use your grinder

with the guard removed. It has been

designed for use only with the guard

attached. Attempting to use the grinder

with the guard removed will result in loose

particles being thrown against the

operator and possibly serious personal

injury.

ASSEMBLY

FIG. 2

FIG. 3

Gear Case Cover

Non-cutting Guard

Prominence

Guard-lock

lever

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare