Master-force 241-0436 Betreibershandbuch PDF herunterladen (Seite 14)

Page 13

CHUCK REMOVAL (FIG. 8 & 9)

FIG. 8

FIG. 9

To remove the chuck:

1. Lock the switch trigger by placing the

direction of rotation selector in the center

(OFF) position.

2. Insert a 5/16 in. hex key into the chuck

of the drill and tighten the chuck jaws

securely.

3. Tap the hex key sharply with a mallet in

a clockwise direction. This will loosen the

screw in the chuck for easy removal. Open

the chuck jaws and remove the hex key.

Remove the chuck screw by turning it in a

clockwise direction.

NOTICE: The screw has left hand threads.

4. Insert the hex key in chuck and tighten

the chuck jaws securely. Tap sharply with

a mallet in a counterclockwise direction.

This will loosen the chuck on the spindle. It

can now be unscrewed by hand.

To retighten a loose chuck

The chuck may become loose on the spindle

and develop a wobble. Periodically check the

chuck screw for tightness.

1. Lock the switch trigger by placing the

direction of rotation selector in center

position.

2. Open the chuck jaws.

3. Insert the hex key into the chuck and

tighten the chuck jaws securely. Tap the

hex key sharply with a mallet in a clockwise

direction. This will tighten the chuck on the

spindle.

4. Open the chuck jaws and remove the hex

key.

5. Tighten the chuck screw.

NOTICE: The chuck screw has left hand

threads.

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

The Driver does not work Battery is depleted Charge the battery

Bit cannot be installed

Sleeve is not released Release the sleeve

Bit does not fit the chuck Use the the appropriate bits

Motor overheating

Be sure cooling vents

are free from dust and

obstacles

Clean, clear vents. Do not

cover with hand during

operation

Mallet

Hex key

Chuck jaws

Mallet

Chuck jaws

Hex key

1 2 ... 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Master-force 241-0436 Betreibershandbuch Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Master-force 241-0436