Master-force 241-0431 Betreibershandbuch PDF herunterladen (Seite 8)

Know your power tool. Read the operator’s manual carefully. Learn the

applications and limitations, as well as the speciﬁc potential hazards

related to this tool. Following this rule will reduce the risk of electric

shock, ﬁre, or serious injury.

Protect your lungs. Wear a face or dust mask if the operation is dusty.

Following this rule will reduce the risk of serious personal injury.

Protect your hearing. Wear hearing protection during extended periods

of operation. Following this rule will reduce the risk of serious personal

injury.

If you are not thoroughly familiar with the operation of a reciprocating

saw, obtain advice from a qualiﬁed person.

When servicing, use only identical replacement parts.

Avoid cutting nails and staples when operating with the wood blade.

Inspect the workpiece carefully and remove all nails and staples before

operation.

Make sure that the blade always extends beyond the shoe and the

workpiece throughout the stroke. Blades may shatter if they strike the

workpiece or shoe.

Do not cut an oversized workpiece.

Check for proper clearance beyond the workpiece before cutting, so that

the blade will not strike the ﬂoor, workbench, etc.

Make sure that the blade is not contacting the workpiece before the

switch is turned on.

Keep the saw blades clean and sharp.

Use only correct blades. Always use blades recommended for the

workpiece material.

Do not leave the tool running. Operate the tool only when hand-held.

Always release the switch to “OFF” and wait for the tool to come to a

complete stop before removing the blade from the workpiece.

Keep the handle dry, clean, and free from oil and grease. Always use a

clean cloth when cleaning. Do not use solvents, brake ﬂuids, gasoline or

other petroleum products to clean the tool; they may damage plastic parts.

Do not operate this tool in a gaseous or explosive environment or near

explosive materials.

Never force the tool. Apply ﬁrm pressure against the saw’s pivot shoe for

the sawing operation; too little or too much pressure could cause jumping

or vibration and may break the blade.

Never operate the saw without the pivot shoe in position. The spindle may

strike against the workpiece and damage the reciprocating mechanism.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Keine Kommentare

Master-force 241-0431 Betreibershandbuch Seite 8